Zinc Chloride Manufacturers Exporters

Muby Chemicals and a few more manufacturing units are in Mubychem Group, the pioneer manufacturer of Zinc Chloride Anhydrous Powder & Solution in India since 1976. Currently we have manufacturing facilities spread across Western India. No other vendor in the world knows Zinc Chloride Anhydrous & Solution any better than we do. We are exporters to all the countries across the globe.
(FDA) GMP Approved units in the group and ISO-9001 Certificate, "REACH" Registered, ISO-22000, Kosher Certified' Halal Certified, HACCP

Zinc Chloride Anhydrous Powder, Battery & Pharmaceutical Grade and Zinc Chloride Solution Manufacturers, Supplier Exporters

We manufacture Zinc Chloride Anhydrous Powder, Battery & Pharmaceutical Grade along with Zinc Chloride Solution.

CAS Number 7646-85-7 EINECS EC Code 231-592-0, HS Code: 282720**, Molecular Weight 136.30 Chemical Formula ZnCl2

Specifications of Zinc Chloride Anhydrous Pharmaceutical & Battery Grade:
Assay: 94-98%
Appearance: Snow-white
Ammonia as NH4Cl: 1% maximum.
Alkalis and Alkaline Earth Metals: 1% maximum.
Iron & Lead: 0.005% maximum.
Dry Basis Assay: 99% minimum.

Specifications of Zinc Chloride Solution:
Assay (as ZnCl2): 40-42% (It is also offered as 70% Zinc Chloride Solution or as desired by the buyer)
Appearance: Water White Liquid
Iron & Lead: Less than 10 ppm
Specific Gravity: 1.40-1.45

Specifications of Zinc Chloride IP Grade:
Description: White or practically white, crystalline powder, odorless, very deliquescent
Assay: 95.0 - 100.5
pH: Between 4.6 – 6.0
Aluminum, Calcium, Heavy Metals, Iron & Magnesium: Passes the Test
Ammonium Salts: Passes the Test
Oxychloride: Passes the Test
Sulphate: Passes the Test.

Assay: Zinc Chloride contains not less than 97.0 percent and not more than 100.5 percent of ZnCl2.
Packaging and storage: Preserve in tight containers.
Identification: A solution of it responds to the tests for Zinc and for Chloride.
Limit of oxychloride: Dissolve 1.0 g in 20 mL of water, add 20 mL of alcohol, and mix. To 10 mL of the mixture add 0.30 mL of 1.0 N hydrochloric acid: the solution becomes perfectly clear.
Sulfate: Dissolve 1.0 g in 30 mL of water: 20 mL of this solution shows no more sulfate than corresponds to 0.20 mL of 0.020 N sulfuric acid (0.03%).
Limit of ammonium salts: To 5 mL of a solution (1 in 10) add 1 N sodium hydroxide until the precipitate first formed is re-dissolved, and then warm the solution: no odor of ammonia is perceptible.
Lead: Dissolve 0.50 g in 5 mL of water, and transfer the solution to a color-comparison tube (A). Add 15 mL of Potassium Cyanide Solution (1 in 10), mix, and allow the mixture to become clear. In a similar, matched color-comparison tube (B) place 5 mL of water, and add 2.50 mL of Standard Lead Solution (see Heavy Metals 231 ) and 15 mL of Potassium Cyanide Solution (1 in 10). Add to the solution in each tube 0.1 mL of sodium sulfide TS. Mix the contents of each tube, and allow to stand for 5 minutes: viewed downward over a white surface, the solution in tube A is not darker than that in tube B (indicating not more than 0.005% of lead).
Alkalies and alkaline earths: Dissolve 2.0 g in about 150 mL of water contained in a 200-mL volumetric flask. Add sufficient ammonium sulfide TS to precipitate the zinc completely, dilute with water to volume, and mix. Filter through a dry filter, and reject the first portion of the filtrate. To 100 mL of the subsequent filtrate add 5 drops of sulfuric acid, evaporate to dryness, and ignite: the weight of the residue does not exceed 10 mg (1.0%).
Organic volatile impurities: meets the requirements

CHARACTERS
Appearance: White or almost white, crystalline powder or cast in white or almost white sticks, deliquescent.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent) and in glycerol.

IDENTIFICATION
A. Dissolve 0.5 g in dilute nitric acid R and dilute to 10 ml with the same acid. The solution gives reaction of chlorides.
B. 5 ml of solution S gives the reaction of zinc.

TESTS
Solution S: To 2.0 g add 38 ml of carbon dioxide-free water R prepared from distilled water and add dilute hydrochloric acid drop wise until dissolution is complete. Dilute to 40 ml with carbon dioxide-free water prepared from distilled water.
pH: 4.6 to 5.5.
Dissolve 1.0 g in 9 ml of carbon dioxide-free water, ignoring any slight turbidity.
Oxychloride: Dissolve 1.5 g in 1.5 ml of carbon dioxide-free water R. The solution is not more opalescent than reference suspension. Add 7.5 ml of ethanol (96 per cent). The solution may become cloudy within 10 min. Any cloudiness disappears on the addition of 0.2 ml of dilute hydrochloric acid.
Sulphates: Maximum 200 ppm.
Aluminium, calcium, heavy metals, iron, magnesium: To 8 ml of solution S add 2 ml of concentrated ammonia R and shake. The solution is clear and colourless. Add 1 ml of disodium hydrogen phosphate solution. The solution remains clear for at least 5 min. Add 0.2 ml of sodium sulphide solution. A white precipitate is formed and the supernatant liquid remains colourless.
Ammonium: Maximum 400 ppm.

MAXIMUM ALLOWABLE
Oxychloride: Passes test
Insoluble matter: 0.005%
Nitrate (NO3): 0.003%
Sulfate (SO4): 0.01%
Ammonium (NH4): 0.005%
Calcium (Ca): 0.06%
Iron (Fe): 0.001%
Lead (Pb): 0.005%
Magnesium (Mg): 0.01%
Potassium (K): 0.02%
Sodium (Na): 0.05%

Zinc Chloride Anhydrous powder & solution, Pharmaceutical & Battery Grade Manufacturers at:

MUBY CHEMICALS
MUMBAI 400009, INDIA
TEL: (OFFICE) +91-22-23770100, +91-22-23726950, +91-22-23774610, +91-22-23723564. FAX: +91-22-23728264

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Brazil Chile Argentina Dubai Cameroon Guatemala Mexico Kuwait ---